新闻资讯

New center

Check category
/
/
Why are there defects in zinc alloy die-casting? How to deal with it?

Why are there defects in zinc alloy die-casting? How to deal with it?

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-06-02 10:02
  • Views:

(Summary description) Zinc alloy die-casting has been used more in today's daily life and production. However, due to various reasons, the defects of zinc alloy die-casting are unavoidable. What causes the defects of zinc alloy? How to deal with it?

Why are there defects in zinc alloy die-casting? How to deal with it?

(Summary description) Zinc alloy die-casting has been used more in today's daily life and production. However, due to various reasons, the defects of zinc alloy die-casting are unavoidable. What causes the defects of zinc alloy? How to deal with it?

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-06-02 10:02
  • Views:

 Zinc alloy die-casting has been used more in today's daily life and production. However, due to various reasons, the defects of zinc alloy die-casting are unavoidable. What causes the defects of zinc alloy? How to deal with it?

1

There are many reasons for the defects, mainly the wrapping gas, improper gate position selection and diversion shape, poor runner shape design, too high internal gate speed, poor exhaust, too deep cavity position, and excessive paint It is caused by factors such as unburnt before filling, unclean charge, and too much machining allowance.

 

 

       According to these reasons, in the face of zinc alloy die-casting, you can choose the gate position and diversion shape that are beneficial to the gas removal in the cavity, and the nozzle cross-sectional area of ​​​​the sprue should be as large as possible than the cross-sectional area of ​​​​the internal gate, and the internal casting should be increased. The thickness of the mouth, the overflow groove and the exhaust duct are opened at the last filling part of the cavity, and the exhaust plug is opened at the deep cavity. The inlay form is adopted to increase the exhaust, and the amount of paint is thin and uniform. Filled after being burned out, using a small amount of gas The coatings and furnace materials must be clean and dry, strictly abide by the melting process, adjust the injection speed,the conversion point of slow injection speed and fast injection speed, reduce the pouring temperature, increase the specific pressure and other measures to solve the problem.

推荐新闻

quality Zinc alloy die casting die
quality Zinc alloy die casting die
Time of issue : 2022-05-17 16:53:52
quality Zinc alloy die casting die, including an upper mold body and a lower mold body, a hinge is fixed to the bottom edge of the upper mold body, and the other end of the hinge is fixed to the top edge of the lower mold body;
See more information
quality Zinc alloy die casting die, including an upper mold body and a lower mold body, a hinge is fixed to the bottom edge of the upper mold body, and the other end of the hinge is fixed to the top edge of the lower mold body;
Transformer good price and quality Aluminum alloy shell
Transformer good price and quality Aluminum alloy shell
Transformer good price and quality Aluminum alloy shell, including top plate, bottom plate, left plate, right plate, front plate and rear plate;
See more information
Transformer good price and quality Aluminum alloy shell, including top plate, bottom plate, left plate, right plate, front plate and rear plate;
good price and quality Aluminum alloy shell
good price and quality Aluminum alloy shell
Time of issue : 2022-05-05 16:27:45
A dense busway with an aluminum alloy casing, including a casing, a box cover is arranged above the casing, a fixing plate is fixedly connected to the left and right sides of the casing, and the fixing plate and the box cover are connected by clamping Institution snaps.
See more information
A dense busway with an aluminum alloy casing, including a casing, a box cover is arranged above the casing, a fixing plate is fixedly connected to the left and right sides of the casing, and the fixing plate and the box cover are connected by clamping Institution snaps.
Previous page
1
2
7

Foshan Nanhai Jiawei metal products Co., Ltd

Contact information:18928682636(Miss Liang)/18928682621(Mr. Tang)

Company phone:0757-85103282

Company fax:0757-85103183

Company email:sunny@nhjiawei.com / jia_tangvic@163.com

Marketing Center: No.90, hongganglihe Road, Lishui Town, Nanhai District, Foshan City

Production base: b3-1, zone 3, Enping Industrial Park, Jiangmen industrial transfer park (Enping Guangen profile Co., Ltd.)

language
中国
韩国
韩国
韩国
韩国
韩国
Copyright © 2021 Foshan Nanhai Jiawei metal products Co., Ltd 粤ICP备19125561号 Powerby :300.cn