新闻资讯

New center

Check category
/
/
/
Advantages of Die casting processing manufacturers

Advantages of Die casting processing manufacturers

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-05 08:37
  • Views:

(Summary description)The advantages of Die casting processing manufacturers include excellent dimensional accuracy of castings. Usually this depends on the casting material, typical values are 0.1mm error at the first 2.5cm size and 0.002mm error for every 1cm increase.

Advantages of Die casting processing manufacturers

(Summary description)The advantages of Die casting processing manufacturers include excellent dimensional accuracy of castings. Usually this depends on the casting material, typical values are 0.1mm error at the first 2.5cm size and 0.002mm error for every 1cm increase.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-05 08:37
  • Views:

The advantages of Die casting processing manufacturers include excellent dimensional accuracy of castings. Usually this depends on the casting material, typical values are 0.1mm error at the first 2.5cm size and 0.002mm error for every 1cm increase. Compared with other casting processes, its casting surface is smooth and the fillet radius is about 1-2.5 microns. Castings with a wall thickness of about 0.75 mm can be produced relative to sandbox or permanent mold casting. It enables direct casting of internal structures such as wire jackets, heating elements, high-strength bearing surfaces. Other advantages include its ability to reduce or avoid secondary machining, high production speeds, casting tensile strengths of up to 415 MPa, and the ability to cast high-flow metals.

Die casting processing manufacturers
The above is a brief introduction to the knowledge about the advantages of Die casting processing manufacturers.

Keyword:

推荐新闻

Wholesale Die casting processing products Introduce the corresponding method of bumping of zinc alloy die casting
Wholesale Die casting processing products Introduce the corresponding method of bumping of zinc alloy die casting
According to the requirements of operation guidance, accumulation is not allowed, and it is necessary to place them in the workstation equipment one by one;
See more information
According to the requirements of operation guidance, accumulation is not allowed, and it is necessary to place them in the workstation equipment one by one;
Wholesale Die casting processing products
Wholesale Die casting processing products
Time of issue : 2022-07-26 14:38:46
Cold chamber die casting can be used when die casting metals that cannot be used in the hot chamber die casting process, including aluminum, magnesium, copper, and zinc alloys with higher aluminum content.
See more information
Cold chamber die casting can be used when die casting metals that cannot be used in the hot chamber die casting process, including aluminum, magnesium, copper, and zinc alloys with higher aluminum content.
Ingate knowledge of Die casting processing in china
Ingate knowledge of Die casting processing in china
Time of issue : 2022-07-19 08:26:56
After the molten metal enters the mold, the parting surface should not be closed immediately, and the overflow groove and the exhaust groove should not directly impact the mold core. The flow direction of the molten metal after entering the mold is as far as possible along the cast ribs and heat sinks, filling from the thick wall to the thin wall, etc.
See more information
After the molten metal enters the mold, the parting surface should not be closed immediately, and the overflow groove and the exhaust groove should not directly impact the mold core. The flow direction of the molten metal after entering the mold is as far as possible along the cast ribs and heat sinks, filling from the thick wall to the thin wall, etc.
Previous page
1
2
10

Foshan Nanhai Jiawei metal products Co., Ltd

Contact information:18928682636(Miss Liang)/18928682621(Mr. Tang)

Company phone:0757-85103282

Company fax:0757-85103183

Company email:sunny@nhjiawei.com / jia_tangvic@163.com

Marketing Center: No.90, hongganglihe Road, Lishui Town, Nanhai District, Foshan City

Production base: b3-1, zone 3, Enping Industrial Park, Jiangmen industrial transfer park (Enping Guangen profile Co., Ltd.)

language
中国
韩国
韩国
韩国
韩国
韩国
Copyright © 2021 Foshan Nanhai Jiawei metal products Co., Ltd 粤ICP备19125561号 Powerby :300.cn